High quality woodworking machinery manufacturer and supplier: After 20 years development, V-HOLD has constructed strong hardware facilities and humanized management system by bringing in tens of brand-new large automotive precision CNC machine center from developed countries such as Japan, German, along with over 67,000m2 large modern workshop with complete facilities and production lines, V-HOLD has realized its high efficient production. Besides that, the cooperation with world famous management consulting firm and introduction of modern business administration system such as ERP, 6S have laid solid foundation to the development of V-HOLD. Thanks for the trust and support of our customer. V-HOLD will consistently stick to the belief that: Profession and concentration accomplish excellent brand ! See more info on woodworking machines manufacturer.
Table and Belt Sander: The stationary belt sander uses a closed loop of paper that travels at speed around a pair of cylindrical drums. One drum is driven by an electric motor, the other is spring-loaded to maintain belt tension. Powered by the same motor, the stationery disk sander uses sanding disks that spin on a backing plate. On both the belt and disk sanders the work-piece is presented to the tool (the opposite is true of portable belt and hand held disk sanders which are presented to the work) on stationary sanders, an adjustable worktable or fence can be fixed in front of the sander to position the work-piece during sanding. Re-saws are a type of band saw specifically designed to cut large sections of timber into smaller sections. Some re-saws can also be used to cut thick veneers making them a popular choice for the manufacturer of engineered wood flooring.
Up-acting machines can limit staged bending because of the possibility of ram tilt, staged bending may not be a viable option on an up-acting machine. Because staged bending utilises multiple stations on one machine, if any of the stations on an up-acting machine are too far from the centre, ram tilt may result. Hydraulic presses come in many different forms and are used in many different industries. The basic structure to all presses is a heavy-duty main frame with hydraulic cylinders. The number of cylinders are dependent on the pressure requirement. They are operated by a hydraulic power pack. The presses can be manufactured with heated or cold platens and can have conveyors fitted to make the presses automated.
The jig saw, which is also known as a scroll saw, is used for making intricate and irregular cuts on small jobs. On thin wooden pieces, jig saw can cut in a curvilinear path. These woodworking machines are actually a type of band saw of much smaller size and specially adapted to irregular work. It consists of a base, frame, table, upper and lower chucks, guide assembly, and blade. Chucks hold the blade with its teeth pointing downward. The blade resembles a hand hacksaw blade in regard to its shape. The blade reciprocates vertically up and down and shapes the wood. The table of the jig saw can be tilted for angular work. The special feature of the saw is that it can be used to cut inside curves. A jig saw is specified by its blade-to-arm distance.
The defining characteristic of all machine presses is that they press a work-piece using high pressure to change its shape. While the exact mechanics vary depending on the type of machine press, most machine presses work by pressing a plate or die onto or against a work-piece. The work-piece can either be manually placed into the machine or a through-feed will automatically place the work-piece in the correct position. Once in position, using hydraulics pressure, the machine press pushes the plate or die against the surface of the work-piece, which causes the work-piece’s shape to deform into the shape required by the manufacturer.
In practice, the workpiece is either clamped between two centers or on a face plate. Long jobs are held between the centers and turned with the help of gouge, skew chisel, parting tool, etc. Generally, the lathe is supplied together with a number of accessories for making it useful for a variety of jobs. The size of lathe woodworking machines, as in the engine lathe, is usually specified in terms of the so-called “swing” of the lathe and the maximum distance between centers.
The wood is fixed between the headstock and tailstock of the lathe. The headstock houses the motor that spins the work-piece. The tailstock is adjustable, moving along the length of the bed to fit work-pieces of various lengths. Once the work-piece is locked in place, the tool rest is set into position. The spinning work-piece is then shaped using a chisel or gouge held fast to the tool rest. Face-plate turning, in with the work-piece is fastened with screws to the face plate of the drive spindle, allows the woodworker to produce bowls and other hollow goods. Find more information on v-holdmachinery.com.